PR301 Single Door Access Controllers with Built-in RFID/PIN Reader
Single Door Access Controllers with Built-in RFID/PIN Reader
Controllers PR series
The controllers in the RACS systems operate as logical devices organizing access to one door.
They can operate with a remote identification terminal, which enables two-side (entrance-exit) door control.
All controllers can operate with a door opening detector and/or door push button.
They are provided with an electric lock control output (Relay output),
alarm system switching output (SWITCH output) and ALARM output.
The PR controllers can operate in a network or a stand-alone mode.
The controllers PRxx1 series should be programmed remotely from a PC computer with PR Master software.
The PR301 controllers are dedicated for use in standalone or networked access control systems,
they offer entry or entry/exit access control for one door. For double side door control the PR301 unit must be connected
with additional PRT series reader (Roger). When operating in autonomic mode controller doesnot offer events recording nor access schedules definitions.
Both features are available in networked mode when controller operates under control of CPR access control panel
or PC computer with PR Master program. Users can be identified by cards, pins or both methods simultaneously (option: card + PIN).
Device offer a special output line dedicated for rearming of an alarm system or another control purpose.
This output can be controlled by time schedule or manually by special group of users, the actual condition of this output is presented on bi-color light.
The PR301/201 might be programmed locally (keypad/programming card) or remotely from PC. The connection to PC requires special programming interface UT-2 or UT-4.
autonomic or networked operation,
built-in proximity reader,
UNIQUE (EM4100/4102) cards,
Card, PIN or Card+PIN identification,
1 000 card users,
250 access groups *,
32 time schedules *,
128 periods per schedule *,
events recording *,
Entry/Exit control (requires second PRT series reader),
three programmable NO/NC input lines,
one relay output and two transistors outputs,
support for door contact, exit button and alarming device,
rearming output for integration with Intruder Alarm System,
programmed manually ** or from PC,
RS485 communication interface,
Windows 95/98/NT/2K/Me/XP software,
ABS casing with TAMPER,
* - available in networked mode only
** - from PC, requires UT-2 communication interface
Operating voltage range 10...15 VDC
Current consumption avg. 80mA
Tamper Normally closed contact, 30V/50mA rated
Reading range Up to 12cm for ISO type cards (depends of card quality)
Cards UNIQUE type, EM4100/4102 compatible
Communication standard RS485 - "Christmas tree" bus topology allowed, terminating resistors not required
Cable distance between controller and terminal 150 m (500 ft)
Cable distance between controller and PC or CPR control panel 1200 m (4000 ft)
Input lines Three inputs, NO/NC type
Output lines Two transistor outputs 1A rating and one relay NO/NC contacts output
Environmental Class Class I - Indoor, temp. +5...+40?C
Dimensions 105 X 105 X 31 mm
PR301 - Controller with proximity and PIN reader
UT-2 - RS232/RS485 communication interface
UT-4 - TCP to serial communication interface. Enables communication with controller or other serial devices through computer network