PR302 Single Door Access Controller with Built-in RFID/PIN Reader
รายละเอียด: PR302 Single Door Access Controller with Built-in RFID/PIN Reader
Controllers PR series
The controllers in the RACS systems operate as logical devices organizing access to one door.
They can operate with a remote identification terminal, which enables two-side (entrance-exit) door control.
All controllers can operate with a door opening detector and/or door push button.
They are provided with an electric lock control output (Relay output),
alarm system switching output (SWITCH output) and ALARM output.
The PR controllers can operate in a network or a stand-alone mode.
The controllers PRxx2 series should be programmed remotely from a PC computer with PR Master software.
The PR302 controller is dedicated for use in standalone or networked access control systems,
it offer entry or entry/exit access control for one door.
When door have to be controlled on entry and exit the controller must be equipped with external Wiegand type reader
or PRT series access terminal from Roger.
Door lock may be activated through internal controller's relay or for increased security through relay output
located on remote XM-2 I/O module. Most of features offered by controller may be controlled by time schedules.
For highest security PR302 may operate with external biometric reader equipped with Wiegand type interface (High Security option).
The PR302 can be integrated with Burglary Alarm system through Toggle output and Ready input.
The Toggle output can be controlled by limited number of users (Switchers) and is dedicated to arm or disarm alarm system.
The actual condition of Toggle output is signalized on bicolor red/green LED.
The Ready input disables Toggle output to arm alarm system when some problem in alarm system exists.
Controller can be used in standalone or networked systems.
The PR302 can be programmed from PC only, connection between downloading computer and access controller require communication interface (UT-2 or UT-4).
fully autonomic or networked operation,
Built-in keypad and proximity reader,
Card, PIN or [Card+PIN] identification,
Both side door control,
optional Wiegand or PRT(Roger) remote reader,
three NO/NC input lines,
one relay output and two transistors outputs,
support for door contact, exit button and alarm signalization,
XM-2 Remote I/O module support,
XM-8 Lift control module support,
RS485 communication interface,
4 000 card users,
250 access groups,
99 time schedules, 128 periods per schedule,
battery back-up for clock,
non volatile 32.000 events register,
biometric reader support (High Security option),
Toggle output for integration with Intruder Alarm System,
programming from PC*,
firmware upgrade through RS485,
UNIQUE (EM4001/2) cards,
Windows 95/98/NT/2K/Me/XP software,
*- requires UT-2 communication interface
Operating voltage range 10...16 VDC
Current consumption App. 80mA
Tamper Normally closed contact, 30V/50mA rated.
Reading range Up to 12 cm for ISO type cards (depends of card quality)
Cards UNIQUE type, EM400 1/2 compatible
Communication standard RS485 "Christmas tree" bus topology allowed, terminating resistors not required.
Cable distance between controller and terminal 150 m (500 ft)
Cable distance between controller and PC or CPR control panel 1200 m (4000 ft)
Input lines Three inputs, NO/NC type
Output lines Two transistor outputs 1A rating and one relay NO/NC contacts output
Relative humidity 10 to 95%
Operating temperature 0...+55?C.
Ingress protection IP30
Dimensions 105 X 105 X 31 mm
PR302 - Controller with keypad. A self-adhesive cover is delivered with new controller so installer may if needed remove keypad
and replace it with plastic cover.
UT-2 RS232/RS485 communication interface
UT-4 TCP to serial communication interface. Enables communication with controller or other serial devices through TCP network.