PR402 Single door access controller
รายละเอียด: PR402 Single door access controller
Controllers PR series
The controllers in the RACS systems operate as logical devices organizing access to one door.
They can operate with a remote identification terminal, which enables two-side (entrance-exit) door control.
All controllers can operate with a door opening detector and/or door push button.
They are provided with an electric lock control output (Relay output),
alarm system switching output (SWITCH output) and ALARM output.
The PR controllers can operate in a network or a stand-alone mode.
The controllers PRxx2 series should be programmed remotely from a PC computer with PR Master software.
General Description The PR402 controller is dedicated for use in Access Control and Time & Attendance systems. It may be configured to perform both function simultaneously or exclusively. Controller is equipped with switched mode power supply circuit adopted for operation with sealed gel type battery. PR402 offers four NO/OC inputs, two relay outputs and two transistor outputs. Inputs and outputs can be configured to several predefined functions. Two remote PRT series access terminals can be connected to controller.
PR402 can register up to 4000 users, every user can be identify by Card, PIN or both method together (Card+PIN). Controller offers In Circuit Programming feature which enables firmware downloading into microprocessor memory. PR402 may operate is autonomic mode or in networked system equipped with CPR control panel or without it. Controller can be programmed from PC only, manual programming is not available, programming from PC requires UT-2 communication interface.
Users 4000 users,
250 access groups,
four user types: Normal, Switcher full, Switcher limited and Master,
[Card/PIN] or [Card+PIN] mode,
Special entry modes:
card usage limit definition,
card validity period definition,
99 general purpose time schedules,
door modes schedule,
identification mode and special entry modes schedule,
T&A registration modes schedule,
Anti-passback reset schedule,
Events, Time & Attendance register
battery back-up for clock,
non volatile settings memory and 32000 events buffer,
events register for T&A purpose,
customer defined T&A registration modes,
T&A registration modes controlled manually from keypad, by external line or by schedule,
Devices support and integration
operation with two remote access terminals (RFID/PIN readers),
Intruder Detector Input with automatic Arming/Disarming feature,
Door contact, Exit button, Forced entry and more function,
integration with IAS (Intruder Alarm System) through output line,
operation with PSAM-1 power supply alarm module,
operation with XM-8 lift control modules,
AciveX (OCX) control for program integration,
autonomic or networked operation,
RACS software pack under Windows 95/98/2K/NT/XP, free for systems up to 8 doors,
transactional method of configuration sending,
firmware upgrade operation,
remote programming from PC (UT-2 or UT-4 communication interface required)
real time clock,
four multipurpose NO/NC inputs,
customer defined input line types,
two multipurpose, electronically protected 1A transistor outputs,
two relay output (form NO/NC contacts, 1.5A rated),
inputs and outputs controlled by time schedules,
Built-in 1.5A impulse buffered power supply,
control of battery charging current,
protection from deep battery discharge,
comply with EN 50133-4,
Power supply 220-240VAC (transformer 30VA/18-22VAC secondary)
Current consumption ~30W
Supply Output (nominal) 13.8 VDC
Communication standard RS485 - Christmas tree bus topology allowed, terminating resistors not required
Battery Charging Current ~300 mA
Battery Cut Off Level ~10.0 V
Operating temp. range 0...+55?C.
Cable distance between controller and reader(s) 150m (500 ft)
Cable distance between controller and PC 1200 meters (4000 ft)
Input lines Four inputs, NO/NC type
Output lines Two transistor outputs 1A rating and two relay 1.5A/24V NO/NC contacts outputs
DC output 12V/1A electronically protected
Tamper Normally closed contact, 30V/50mA rated
Ingress code IP30 (for internal use only, without water protection)
Operating humidity 10 to 95% (non condensing)
Operating temperature 0..+55?C
Dimensions (mm) 280 x 290 x 80
Weight ~ 3,5 kg